| WRC2022
|
The
Data Express license has expired.
|
The product license has expired.
|
Contact Micro Focus Product Support for password verification or license extension.
|
All batch phases
|
| WRC2037
|
The phase is not enabled.
|
An internal error occurred during an enabling procedure.
|
Make sure that you have entered the correct password. If the problem persists, contact Micro Focus Product Support for verification
of your product license.
|
All batch phases
|
| WRC2039
|
The Sampling phase is not enabled.
|
The product has not been enabled to perform the Sampling phase.
|
Make sure that you have entered the correct password. If the problem persists, contact Micro Focus Product Support for verification
of your product license.
|
Sampling
|
| WRC2040
|
The Copybook/File Association phase is not enabled.
|
The product has not been enabled to perform the Copybook/File Association phase.
|
Make sure that you have entered the correct password. If the problem persists, contact Micro Focus Product Support for verification
of your product license.
|
Copybook/file association
|
| WRC2041
|
The Data Masking phase is not enabled.
|
The product has not been enabled to perform the Data Masking phase.
|
Make sure that you have entered the correct password. If the problem persists, contact Micro Focus Product Support for verification
of your product license.
|
Data masking
|
| WRC2042
|
The Data Subsetting phase is not enabled.
|
The product has not been enabled to perform the Data Subsetting phase.
|
Make sure that you have entered the correct password. If the problem persists, contact Micro Focus Product Support for verification
of your product license.
|
Data subsetting
|
| WRC2044
|
The Life Cycle phase is not enabled.
|
The product has not been enabled to perform the Life Cycle phase.
|
Make sure that you have entered the correct password. If the problem persists, contact Micro Focus Product Support for verification
of your product license.
|
Life cycle
|
| WRC3024
|
The From value must precede the To value.
|
The message displayed is a result of a check on the entered data.
|
|
|
| WRC3029
|
The field contains an incorrect user exit value of
x.
|
|
|
|
| WRC3033
|
x changed file(s) have been found.
|
An informational message showing the number of changed files.
|
|
Life cycle
|
| WRC3034
|
x copybook(s) that have been changed and are not associated have been found.
|
An informational message showing the number of changed copybooks not associated to a file.
|
|
Life cycle
|
| WRC3035
|
x new copybook(s) have been found.
|
An informational message showing the number of new copybooks found.
|
|
Life cycle
|
| WRC3036
|
x new file(s) have been found.
|
An informational message showing the number of new files found.
|
|
Life cycle
|
| WRC3037
|
x file(s) with changed fields that do not require confirmation have been found.
|
An informational message showing the number of changed fields that do not require manual handling.
|
|
Life cycle
|
| WRC3038
|
x file(s) with changed fields that require confirmation have been found.
|
An informational message showing the number of changed fields that require manual handling using
Work with changed fields.
|
|
Life cycle
|
| WRC3039
|
x file(s) have been updated.
|
An informational message showing the number of fully processed files.
|
|
Life cycle
|
| WRC3040
|
x copybook(s) have been updated.
|
An informational message showing the number of fully processed copybooks.
|
|
Life cycle
|
| WRC4020
|
The segment
Segment Name was found in the DBD structure
DBD Name but it was not found in the Knowledge Base.
|
The DL/I segment has been deleted from the
Data Express knowledge base or the DL/I unload File has been changed between cataloging and submitting the Job.
|
Verify that the DBD structure is cataloged and if the segment has been deleted or the upload file has been changed it is
necessary to reload all the DBD structure.
|
Test Environment Creation
|
| WRC4021
|
The segment
Segment Name belonging to the DBD structure
DBD Name was not found in the Method
Method Name.
|
The DL/I segment has been excluded from the Method creation.
|
Verify the Method steps and if the segment has been excluded it is necessary to create a new method with the excluded segment.
|
Test Environment Creation
|
| WRC4022
|
The field segment name
Segment Name contains invalid characters.
|
The field segment name of input file for the "load from external interface" contains invalid characters.
|
Verify the characters used for the field segment name.
|
Load From External Interface
|
| WRC4023
|
The user does not have privileges for table
Table Name.
|
The user submitting the JCL does not have proper privileges for the DB2 table shown in the message.
|
Modify privileges to give Public Grant to the Table.
|
Load Sequential File and Load Impsrc For Life Cycle.
|
| WRC4024
|
The length of combined data elements
combined name in table
Table Name cannot be longer than 230.
|
The maximum length of the combined fields is 230 digits.
|
Create an exit routine in order to manage the longer combined data elements.
|
Data Subsetting Sampling
|
| WRC4025
|
Unsupported Data Type for table
Table Name.
|
There are unsupported DB2 data types in managed table.
|
Data Express does not support some DB2 Data Types for Masking, Subsetting, Sampling via direct Access. It is necessary to Unload the table
data into a SEQUENTIAL file.
|
Data Subsetting, Sampling, and Masking
|
| WRC4026
|
Sampling is not supported for ADABAS.
|
The sampling process is not supported for ADABAS data base.
|
|
Data Sampling
|
| WRC4027
|
File
Datastore Name - class
Class Name: a class short description is required.
|
The class short description is missing.
|
Insert the class short description into the Field DRCLATYPE of "Import Classification from Data Dictionary" sequential file.
|
Import Classification from Data Dictionary
|
| WRC4028
|
Unexpected syntax was found in SYSPUNCH
SYSPUNCH Name during parsing of row with this statement
SYSPUNCH Statement.
|
The BMC SYSPUNCH parser has encountered unsupported syntax in a SYSPUNCH statement.
|
Correct the SYSPUNCH statement.
|
Data Inventory
|
| WRC4029
|
No file found containing class
Class Name. Check JCL input class.
|
The referential integrity file used by the JCL Import Method contains an invalid input class.
|
Correct the referential integrity file.
|
Data Subsetting
|
| WRC4030
|
ParentANDChildName field
ParentANDChildField, file
ParentDataStoreANDChildDataStore"
|
The referential integrity file contains a relationship in which a Parent data store its Child data store are recursive.
|
In the referential integrity file, identify the affected parent and child tables and correct the relationship.
|
Data Subsetting
|
| WRC4031
|
Method
Method Name has not been successfully updated, please check to see if the method exists.
|
The method has been deleted or it has not been created.
|
Check the method name inserted into Job or uncheck the new button "Update method before submit the JCL".
|
Data Subsetting
|